Short Cycle Hot Press For CDF/HMR
Application of Short Cycle Press
Melamine press machine is for direct hot lamination of melamine paper or phenolic film on wood-based panels such as MDF, HDF, Particleboard, Chipboard, or Plywood. The laminated boards are used for making home furniture such as wardrobes, kitchen cabinets, and office furniture.Laminated-boards-for-melamine-press-machine
Different pressure will press out different depth textures from flat to embossed. The surface different designs depend on stainless steel templates which are installed inside the melamine press machine.
Melamine press machine can also work for the phenolic film on plywood lamination. It works the same principle as melamine lamination. But it requires very good quality plywood surface finishing.
| Parameters according to board size | ||||||
| Board size (mm) | 4*8 | 4*9 | 6*8 | 6*9 | 6*12 | 7*9 |
| 1220*2440 | 1220*2750 | 1830*2440 | 1830*2750 | 1830*3660 | 2100*2750 | |
| Hot platen size (mm) | 1400*2600 | 1400*2900 | 1950*2600 | 1950*2900 | 2000*4000 | 2300*2900 |
| Heat consumption (kcal/h) | 20*104 | 20*104 | 30*104 | 30*104 | 40*104 | 40*104 |
| Parameters according to pressure：4*8 | Parameters according to pressure: 6*8 |
| Model | 1200T4*8 | 1600T 4*8 | 1800T 4*8 | 2000T 4*8 | 2800T 4*8 | 3200T 4*8 | 1600T 6*8 | 1800T 6*8 | 2000 T 6*8 | 2800T 6*8 |
| Norminal pressure (KN) | 12000 | 16000 | 18000 | 20000 | 28000 | 32000 | 16000 | 18000 | 20000 | 28000 |
| Unit pressure (kg/cm2) | 40.3 | 53.7 | 60.4 | 67.1 | 94.1 | 107.4 | 35.8 | 40.3 | 44.8 | 62.7 |
| Main Oil cylinder (mm*pcs) | 320*6 | 320*6 | 340*8 | 360*8 | 420*8 | 450*8 | 320*8 | 340*8 | 360*8 | 420*8 |
| Lift Oil cylinder (mm*pcs) | 80*4 | 80*4 | 80*4 | 80*4 | 80*4 | 100*4 | 100*4 | 100*4 | 100*4 | 100*4 |
| Hot platen Thickness（mm） | 150*120 | 150*120 | 150*120 | 150*120 | 160*140 | 180*160 | 160*140 | 160*140 | 160*140 | 180*160 |
| Thickness of frame (mm*pcs) | 50*4 | 60*4 | 70*4 | 70/80*4 | 100/110*4 | 120*4 | 60*4 | 70*4 | 70*4 | 110*4 |
| Heat consumption (kcal /h) | 150000 | 150000 | 150000 | 150000 | 150000 | 150000 | 300000 | 300000 | 300000 | 500000 |
| Pumping Motor Power (kw) | 35.2 | 35.2 | 35.2 | 35.2 | 35.2 | 35.2 | 35.2 | 35.2 | 35.2 | 35.2 |
| Parameters according to pressure: 7*9 | Parameters according to pressure: 6*12 |
| Model | 1600T 7*9 | 1800T 7*9 | 2000T 7*9 | 2400T 7*9 | 3000T 7*9 | 2400T 6*12 | 2800T 6*12 | 3200T 6*12 | 4500T 6*12 | 5700T 6*12 |
| Norminal pressure (KN) | 16000 | 18000 | 20000 | 24000 | 30000 | 24000 | 28000 | 32000 | 45000 | 57000 |
| Unit pressure (kg/cm2) | 27.7 | 31.1 | 34.6 | 41.5 | 51.9 | 35.8 | 41.8 | 47.7 | 67.1 | 85.1 |
| Main Oil cylinder (mm*pcs) | 320*8 | 320*9 | 340*9 | 320*12 | 360*12 | 400*8 | 420*8 | 450*8 | 480*10 | 540*10 |
| Lift Oil cylinder (mm*pcs) | 100*4 | 100*4 | 100*4 | 100*4 | 100*4 | 120*4 | 120*4 | 120*4 | 120*4 | 120*4 |
| Hot platen Thickness（mm） | 160*140 | 160*140 | 160*140 | 160*140 | 180*160 | 180*160 | 180*160 | 180*160 | 200*180 | 220*200 |
| Thickness of frame (mm*pcs) | 70*4 | 50*6 | 50*6 | 60*6 | 80*6 | 60*8 | 70*8 | 70*8 | 80*10 | 100*10 |
| Heat consumption (kcal /h) | 300000 | 300000 | 300000 | 500000 | 500000 | 400000 | 400000 | 400000 | 400000 | 400000 |
| Pumping Motor Power (kw) | 35.2 | 35.2 | 35.2 | 35.2 | 35.2 | 35.2 | 35.2 | 35.2 | 35.2+35.2 | 35.2+35.2 |
Highlights Huibo Short Cycle Press Line
Solutions We Can Provide for You
Semi automatic PlanA
① Automatic Feeding table
② Main hot press machine
③ Out roller table
④ Hydraulic station
⑥ Electrical cabinet
Actual Photo
Plan A for a semi-automatic production line mainly includes feeding table, a main short-cycle hot press, and a roller table for manual trimming. This model is the most basic model for semi-auto short-cycle press.
Production Video
For budding entrepreneurs in the melamine veneer industry with limited budgets and moderate initial production needs, semi-automatic short-cycle presses offer exceptional value. They offer high flexibility, low cost, a small footprint, and lower energy consumption, saving long-term expenses while ensuring stable daily output. This solution requires manual operation from board loading to finished product delivery, incurring significant labor costs. However, this flexibility allows for flexible adjustments in the number of workers based on order volume, making it ideal for entrepreneurs with unstable initial production needs, achieving a balance between overall cost control, stable production, and market development.
Semi automatic PlanB
① Automatic feeding table
② Main hot press machine
③ Vacuum pad unloader
④ Output roller table
⑤ Hydraulic station
⑥ Electrical cabinet
Actual Photo
Plan B for a semi-automatic production line mainly includes feeding table, a main hot press machine , a vacuum pad unloader, and a roller table for manual trimming. This is the most popular semi-model.
Production Video
Compared to Plan A, the Plan B semi-automatic short-cycle press features an automatic vacuum cup unloading device. This automatically removes the pressed sheets from the hot press, improving production efficiency and enabling more specialized production. The system replaces manual unloading with automatic unloading, ensuring worker safety while protecting the stainless steel sheet from scratches.
Fully automatic - Plan C
① Vacuum carrier loader
② Automatic feeding table
③ Main hot press machine
④ Guardrail
⑤ Auto Trimmer
⑥ Belt conveyor turn-over
⑦ Vacuum carrier stacker
Actual Photo
Plan C for automatic production line mainly includes vacuum carrier loader,automatic feeding table a main hot press machine,unloder, auto trimmer, aligner conveyor and vacuum carrier stacker. This model is the most basic for the automatic line
Production Video
This most basic automated production line integrates automatic loading and unloading (using vacuum suction cups) and automatic trimming functions. These key features significantly reduce labor costs by minimizing manual intervention during material handling and trimming. In addition to saving labor, the production line is also highly flexible: multiple configuration options allow customers to add or remove components according to their specific production needs, and support customized layouts (such as I-shaped, L-shaped, or U-shaped) to accommodate different workshop spaces. This combination of low labor costs, configurable settings, and layout adaptability makes it a practical choice for companies seeking to strike a balance between efficiency and customization.
Fully automatic - Plan D
① Vacuum carrier loader
② Automatic feeding table
③ Main hot press machine
④ Guardrail
⑤ Auto trimmer
⑥ Belt conveyor turn-over
⑦ 32pcs Stand chain cooling line
⑧ Aligner conveyor
⑨ Vacuum carrier stacker
Actual Photo
Plan D for automatic production line mainly includes vacuum carrier loader, automatic feeding table,main hot press machine ,unloader,auto trimmer,belt conveyor turn-over,stand chain cooling line ,aligner conveyor ,Vacuum carrier stacker.This is the most popular auto model.
Production Video
Plan D builds on Plan C by adding the belt-conveyor turn-over ands stand chain cooling line , primarily for cooling the laminates. Residual heat between finished laminates can cause them to warp, ultimately affecting furniture quality. To prevent overheating before stacking, a chain-connected cooler is used to cool the laminates. This automated production line requires only one operator, significantly reducing production costs and enabling fully automated production.
Fully automatic - Plan E
① Double-layer paper rack
② Automatically retractable board rack
③ Lifting ground roller
④ Side feed ground roller
⑤ Push Board dust removal rack
⑥ Vacuum carrier loader
⑦ Automatic feeding table
⑧ Main hot press machine
⑨ Guardrail
⑩ Auto Trimmer
⑪ Cooling board conveyor rack
⑫ 50-pcs double-fork drying line
⑬ Conveyor rack
⑭ Vacuum carrier stacker
⑮ Finished electric ground roller
⑯ Electric ground roller for material preparation
Actual Photo
PlanE for full automatic production line mainly includes a ground roller conveyor, lifter, pusher, brusher, auto board carrier, belt loader, hot press machine, vacuum pad unloader, trimmer, stand chain cooler, turn-over, and auto stacker.
Production Video
PlanE of the automated short-cycle press production line is based on Plan D, but adds equipment for cleaning the raw paperboard on the feed side. The cleaning unit consists of a ground roller conveyor, a roller lift, a pusher for separating the paperboard sheet by sheet, and a double-roller scrubber for cleaning both sides of the raw paperboard. This fully automated equipment saves workers time on cleaning the machinery and paperboard, making it the most efficient solution.
Related Products
Containers Delivery
The short cycle press delivery requires a special container to load the main press machine frame due to the over height. Usually, it is an open-top container, but when the frame is too heavy, then will require the flat rack container.
How can I know who is a good manufactuer of press machine?
In fact, many suppliers from internet are not real manufacturers but traders. They normally catch your attention by good price. But be careful cause internet you can get everything. To ask them provide you old customers list and visit the factory are very necessary before making decision. The press machine is working for over 10 years, so choose a good quality manufacturer is most important.
How about the after sales service? Can I get spare parts locally?
We provide 12 months quality guarantee period time, to supply the damaged parts due to itself quality reason by free. 90% of components are international standard which you can get from local market.
Does the machine need installation at our site?
Yes, the new buyer especially needs. We will send engineers to your site for installation and training the basic production skills.
Does the press machine work alone or need other equipment?
To work press machine, you need one boiler to supply hot oil for heating. Besides the press machine itself needs different stainless steel press plates for making different designs.
Should I choose semi-model or fully automatic model?
The fully automatic line has cleaning unit, auto board handling system, auto trimming and auto stacking pallet. You can choose according if you need these functions.
How can I choose the correct pressure?
For particle board lamination is from 20~50 kg/cm2, for MDF embossing pressure is from 50~80 kg/cm2, for laminate flooring is from 60~110 kg/cm2
Can't find the service you're looking for? Contact us!
To inquire about our products, please leave your email to us and we will contact you within 24 hours.
Products
Contact Info
Telephone: +8617753862395
E-mail: salesmanager@huibomachinery.com
Address: Yitang Industrial Park, Linyi City, Shandong Province, China